For the production of carton partitions, pads, there are machines specifically designed to produce compact, corrugated cardboard hives, in addition to traditional beehives, they can produce cardboard squares, shelves angles, reinforcements, protective packaging, carton interiors and corrugated cardboard boxes. In a single step, the machine can crease through the automatic feeder, cut longitudinally, crosswise cut, notches for the beehives, with scale-shaped piece exit. For example, the Roda Super Combi 130, not only limited to the production of beehives, can become a combined cutter with transverse cut, horn, tracing from top to bottom, all in one step. Then through the model machine Andax, you can work all the qualities of cardboard, from the micro wave to the double double, with fully automatic operation. The hives produced can have up to 6 channels, with transverse elements up to 24. Speed up to 50 hives per minute. You can then work directly from the roll (reel) with automatic machines, suitable for producing compact cardboard hives, strips, squares. Usually the width of the reel is about 700 mm. with advancement adjustable from a minimum of 10 mm. up to a maximum of 500 mm. notch distance 30 mm. with roll diameter of about 1300 mm. There are very efficient machines for the production of partitions, with the possibility of producing V-cut dividers with a locking system. There are machines with 3 feeders to mount the hives with automatic Collapser, machines very Jumbo hives, with the possibility of producing hives up to 1520 mm. of length. These very efficient machines can produce in particular partitions, pads, in corrugated board, partition assembler for big format, partitions inserted and glued in boxes, pads and partitions from the reel, solid board, partition assembler, solid board.
